Mechanical pop-off valve IN ALUMINUM!
Much more resistant than the original, it works mechanically, not electronically like the original, so without the risk of not releasing excess pressure.
It connects plug & play like the original!
GUIDE:
you need to remove the aluminum-coated tube. Using pliers, unhook the two clamps at the two ends of the tube.
after which you place the cap on the left near the filter box to close the hole.
Let's move on to the pop-off, under the original one there are two screws, unscrew them with a socket wrench, remove everything, insert the new pop-off and connect it to the tube underneath from which you detached the original one.
If you don't have the silicone vacuum hose, you need to run a hose from the intake manifolds to the pop-off end.
Finally you have to tie it using the two holes where the original one was, also tie the plug so that it is not visible, because it will no longer be connected.
If you get an engine warning light, you can simply remove it via OBD with the ECU scanner or in the control unit.
Besides having a beautiful sound, you will have greater safety!
